Solenoid valve SAP G 1/2" 230V EPDM

Voltage: 230 V AC 
Thread: G 1/2" 
DN [mm]: 13 
L [mm]: 66 
Working pressure [bar]: 0.5 - 16 
kv value* [m3/h]: 3,89 
kv value* [l/min]: 64,0 
Weight: 714 g / pc. 

Materials: Bodies: brass, internal parts: brass / stainless steel, seal: EPDM 
Temperature range: -20°C to max. +130°C, environment: max. +65°C 
Power consumption: Direct current: 13 W, alternating current: 22 VA (draw: 40 VA) 
Media: Compressed air, neutral gases, neutral low-viscosity media, other media on request 
Protection class: IP 65 
Information: For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably). 

*water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge. Air flow rate [l/min] approx. 13,4 x kv x Pinput, when Poutput < Pinput/2 (Pinput and Poutput are absolute values in bar.) **Please enter the required material: N=NBR, E=EPDM, V=Viton